 |
|
|
|
 |
From AutoCAD
1. Open
the drawing file in AutoCAD
2. Type PLOT
3. Go to devices and highlight the desired driver (Repro
for B&W, Repro Color for Color - see driver setup sheets
for details), then click OK 
|
|
4. Make sure plot to file
is checked on (lower left corner or plot window)
5. Go to Sheet size to set up Final Plot size
6. Go to scale to set required image scale
7. Go to Preview and select FULL to double
check that the image is entirely on the page, appears to be
the expected size and that all desired elements are visible.
If anything looks incorrect here, it will be incorrect on the
plot.
8. Go to OK to begin writing the file. The plot
file will have the same name as the drawing file with the .PLT
extension and be located in the same directory as the drawing
file unless otherwise specified (8a) before clicking OK.
9. Copy the .PLT file to disk for plotting.
|
| |
|
|
|
| |
|
| |
Convenience
* Quality * Technology
We Make You Look Good
Reprographics & Digital
Imaging
Serving Arizona since 1956
|
|
|
