These are the steps to configure AutoCAD 14 to make Black and White .PLT files for Reproductions, Inc.

1. Start AutoCAD 14.

2. At the Command Prompt, type CONFIG

3. Select New (to enter a new plotter configuration)

4. Choose Hewlett Packard HPGL/2 Devices - ADI 4.3 -for
AutoDesk

5. At the bottom of the screen ® Add Description for Plotter: Enter
Repro

6. From the supported models menu, choose HP 750C plus

7. Choose defaults until you reach, "Do you want to change anything?" -
YES

8. "Do you want to change any of the above parameters?" - NO

9. Choose defaults until you reach "Write the plot to a file?" - YES

10. Choose defaults until you reach the end.

11. Click OK to save.

q When generating a plot file be sure to select the Repro set-up and then adjust your plotting parameters as normal (additional parameters, scale & sheet size).

q If you are plotting EXTENTS, make sure that you perform a ZOOM EXTENTS prior to creating the .PLT file to ensure AutoCAD updates the extents and to double-check for any stray lines that could affect your output.

q We suggest leaving the Pen Numbers/Colors and weights at their default, and allowing our software to make adjustments for weights and screens. Changing the defaults can result in incorrect line thickness.

q It is recommended to do a Full Preview in the Plot Window to verify the DWG size and that the plot looks correct.